|Home||» Products||» STATCOM Panels||» STATCOM Panels|
PRODUCT DESCRIPTION :
The STATCOM shall be fabricated out of 14/16 gauge CRCA
sheet steel in a free-standing and floor-mounted cubicle compartment.
Pre-treatment of panel shall be carried out before epoxy powder
coating with eight tank process. The STATCOM panel shall adhere to IP 41 protection standard.
Cable gland plates shall be provided on top of the panels. Lifting hooks
shall also be provided at least on all four corners of the panels. Panel
shall be suitable for 415V, 3 Phase, 4 Wire, 50Hz supply system.
The STATCOM panel shall have a tolerance of 10% for the voltage
and 5% for the frequency. Earthing terminals shall be provided inside each STATCOM panel.